Lighting grip

Swivel adapter from spigot 28 mm stud (or 16 mm female) to spigot 16 mm pin, also known as “swivel baby pin 28 to 16 mm” or “EZ Grip Finger”. One end has a 28 mm spigot stud with 16 mm female receiver.

This slim and lightweight aluminium clamp is ideal to hang all types of luminaries.It features a T handle and in order to meet all safety requirements the clamp has also been designed with a dedicated slot.

This aluminium gravity casting Barrel Clamp works on diameters from 42mm to 52mm. It holds a payload of 40kg on 16mm attachment and 600kg on 28mm attachment.

A “cheeseboro” clamp with a 1-1/8″ pin attached. Serves multiple purposes. Use it with a piece of pipe with a diameter of 1-3/4″ to 3-1/4″ as a temporary overhead grid.

All Cardellini Clamps Feature: Rust-proof construction: stainless steel shaft and bushing, aluminum jaws and knob. Patented Jaw design firmly grips almost any shape.

Column Arm Length: 20″.
Load Capacity: 10 kg.
Mounting:. 1X 28mm (1-1/8″).
Junior Receiver. 1X 16mm (5/8″) Baby Pin.

Junior Size 1-1/8″. Attachments. 26.6, 10.6 and 6.0″ Extensions: Chrome-Plated Finish. Steel Construction. This is a chrome-plated Conka Bonka Stand Extension Kit .

Gaffer Grip with 5/8″ Pins is a multi-use clamp which can hold small light fixtures virtually anywhere that the adjustable jaw can clamp over. The jaw is equipped with 12 rubber gripper pads.

The strongest and most popular Grip Head in the industry. Guaranteed to hold. Set it and forget it! Will not slip. Plates feature two holes 3/8″ & 5/8″, eliminating confusion.

Aluminum Alloy Construction. Double Grip Head. This is an Gobo Head This 4.5″ grip helper adds versatility to any light stand. It accepts an umbrella, stud, overhead, boom arm, flag, or gobo.

The Grip Helper is a combination of several adapters in one. The Junior Pin of the Grip Helper mounts into a light stand, and the Junior Receiver allows the mounting of a light fixture.

The Junior Wall Plate has a 1 1/8″ diameter receiver. Attach to apple box, set wall, or lumber with screws. Enables permanent or semi-permanent mounting of your lighting fixture or grip item to surface.

Magic Arm is a fully articulated arm with 90° pivotable and 360° rotatable ends, and an elbow that rotates 360°. The knob allows partial loosening for safe and precise positioning of a light head or camera.

This chrome plated steel arm allows you to place a light over an obstruction. It has a length of 50cm (19,6 in) and features a 28mm socket and pin. Weight: 1.5 kg. Arm Length: 50 cm. Closed Length: 50 cm.

Pelican grip is a useful strong clamps and it can take heavier lights than the gaffer clamp.

Length: 150cm. 15kg payload limit. Use to attach clamps, arms etc. to support lights.

Also known as Autopoles. Supplied by Procam in black.

The expanding casting black pole cat provides pressure for holding the pole in place between door jambs, or in window frames. It extends from 4-1/2 ft to 8 ft.

The best strength-to-weight ratio in the business makes this the most trusted monopod in the field. The rugged nylon yoke is strong, lighter than steel and will never rust.

Four pointed steel pins with black powder coating to mount on a foam core. Comes with a 5/8” baby stud. Designed to be stabbed into the side of the foam core, it can be mounted on a stand or grip head.

Poly-Holder has a 5/8in spigot for mounting. The foam board clamp has two sides; white for the reflective side of the polystyrene; black for the black light-stopping side.

The ARRI ST5 5000W Fresnel is a theater workhorse with tungsten lampheads that can handle high temperatures and are free of spill light. The large, short focal length lenses provide optimum light.

Comes filled with 15 lbs soft sand. These studio quality sandbags are our most popular product. Film professionals can use saddle sandbags to ballast light stands, tripods, and equipment.

The function is as the same as KCP-724 but rigging of any round pipe comes with 1-1/2’’ schedule 40 which is OD 1.9”(48.3mm) instead of lumber between two rigid points.